IBM V.90 PCI, Инструкция по установке

Страница: 20 / 82

20
Configuring UnixWare
Note: These installation instructions are for Unixware 2.1. Installation on other
versions of Unix may be different. Please consult your operating system
manual or help text for instructions regarding installation of a serial mo-
dem.
1. After you have installed the modem into your machine, turn on the power and
allow the system to boot normally. Login to Unix as “ Desktop User ”.
2. Go to Administrative_Tools-Hardware_Setup . This will require the root
password.
3. In the Hardware_Setup main menu, choose Hardware Device Configura-
tion and press <enter> .
4. Under the Device Name column, try to locate all of the “Unknown Devices”.
For each unknown device you find, move the cursor to each row and press F6
for information. Look for the item “Board ID”. You will be looking for a
board with ID “ 0x11c10480 ”.
5. Once you find the board, press <enter> to back out to the previous screen.
Now use the tab key to move the cursor to the “ Device Name ” field for that
board. Press the F2 key to bring up the list of choices.
6. In the Device Name Choices screen, choose COM Port or asyn , then press
the <enter> key to go back to the Hardware Devices Configuration screen.
7. Press the F10 key to return to the Main Menu . Now choose “ Apply Changes
& Exit DCU ”.
8. Reboot the computer.
9. After the system has restarted, you will need to issue an AT Command to
configure the modem to use the PSTN ( P ublic S witched T elephone N etwork)
of your country. The modem can be configured for: Canada, Japan, and the
United States.
10. To configure the modem’s country setting, open a terminal program. At the
command prompt, type: at<enter> . The response should be “OK”. Now type
one of the following commands depending on the country where the modem
will be operated.
Canada: at%T19,0,1c<enter>