IBM TS7700 Series Скачать руководство пользователя страница 62 | Manualshive

Страница: 62 / 117

background image

August 15, 2017

© Copyright IBM Corporation, 2017 Page 62 of 117

operation, if it still
fails, call IBM
Support

Library Manager data was not successfully deleted.

1) First ensure that
Service Access has
been enabled on
the library
manager. Retry. If
still unsuccessful
call IBM Support

Error clearing existing data from the TS7700 cache.

Call IBM Support

Error clearing existing data from the TS7700 database

Call IBM Support

Once the erase process has completed, the TS7700 will return to its online state and you can continue with
copy export recovery.

7. Starting with an empty TS7700, there are several set-up tasks you will need to perform using the library
manager associated with the recovery TS7700 (for many of these tasks you may only need to verify that the
settings are correct; the setting are not deleted as part of the erasure step):

•

Verify or define the volser range(s) for the physical volumes that are to be used for and after the
recovery. The recovery TS7700 must know what volser range(s) it is to consider it owns. The steps used
to define volser range(s) can be found in Appendix A – Volser Range Definition for systems running
8.30.x.x or higher code, Appendix B – Volser Range Definition for systems from 8.5.x.x to 8.21.x.x and
Appendix C – Volser Range Definition for pre 8.5.x.x systems. Systems running 8.5.x.x with 3494
attached libraries must define the ranges on the 3494 also per Appendix C.

•

If the copy exported physical volumes were encrypted, you must set up the recovery TS7700 for
encryption support and have it connected to an external key manager that has access to the keys used to
encrypt the physical volumes. If you are going to write data to the recovery TS7700, you must also
define the pools to be encrypted and set-up their key label(s).

•

If you are executing the copy export recovery operations to be used as a test of your disaster recovery
plans and have left the “Disaster Recovery Test Mode” checkbox checked, the recovery TS7700 will not
perform reclamation.

If you are running copy export recovery due to a real disaster, then redefine the physical volume pools
by following the procedures found in Appendix A – Manage Physical Volume Pool Properties for
systems running 8.30.x.x or higher code, Appendix B – Management Storage Pool Properties for
systems from 8.5.x.x to 8.21.x.x and Appendix C – Management Storage Pool Properties for pre 8.5.x.x
systems.

8. With the TS7700 in its online state, but with all virtual tape drives varied offline to any attached hosts,
login to the management interface and then select

Copy Export Recovery

from the

Service

menu (at code

level 8.30.x.x or higher

)

or

Copy Export Recovery

from the

Service & Troubleshooting

menu (at code

level from 8.5.x.x to 8.21.x.x) as shown below:

«
...
60
61
62
63
64
...
»

Содержание TS7700 Series






















































































































Отзывы:

Нет отзывов

Похожие инструкции для TS7700 Series

ShareCenter DNS-343

Бренд: D-Link Страницы: 12

Camedia MAUSB-100

Бренд: Olympus Страницы: 2

Бренд: U.S. General Страницы: 6

Terascale ST4000NC000

Бренд: Seagate Страницы: 37

Бренд: morse Страницы: 6

Бренд: Kaser Страницы: 3

Бренд: ST Страницы: 9

Mobile Memory Card TS1GRMMC4

Бренд: Transcend Страницы: 11

CHROME BOX 2.5 L

Бренд: INOVU Страницы: 30

Бренд: SanDisk Страницы: 25

Бренд: Samsung Страницы: 1

Бренд: Rockler Страницы: 4

Бренд: morse Страницы: 11

Бренд: Huawei Страницы: 8

OceanStor 18000F V5 Series

Бренд: Huawei Страницы: 29

Бренд: Huawei Страницы: 11

Бренд: Huawei Страницы: 14

Quidway S5000 Series

Бренд: Huawei Страницы: 68

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды