IBM TotalStorage L10, Справочное руководство CLI

Страница: 61 / 96

© Copyright IBM Corp. 2004
49
Chapter 3. Diagnostics menu (root/diag)
The Diagnostics menu provides commands for determining and correcting issues with
normal switch operation.
Menu commands
Displaying port AL_PAs (root/diag/galpa)
This command displays all AL_PAs for a single port or for all ports.
To view the AL_PAs for all ports:
From the Diagnostics menu (root/diag), type
galpa
and press E
NTER
.
To view the AL_PAs for a specific port:
From the Diagnostics menu (root/diag), type
galpa <port number>
and press E
NTER
.
Displaying LIM port (root/diag/glim)
This command displays the Loop Initialization Master (LIM) port for a single zone or for
all zones. The LIM port is responsible for starting the change notification process in
each zone.
To view the LIM ports for all zones:
From the Diagnostics menu (root/diag), type
glim
and press E
NTER
.
Table 25. Diagnostic menu commands
Command Description
Additional
Information
1. galpa Displays the port AL_PAs. See page 49.
2. glim Displays the Zone Initialization Master port. See page 49.
3. os Displays the detected ordered sets. See page 50.
4. ps Displays the port state. See page 51.
5. delta Displays the port clock delta. See page 51.
6. showpri Displays the primary ports and the associated
duplicates. See page 52.
7. prtctrs Displays the error counters for one or more ports. See page 52.
8. clrctr Clears the counters. See page 52.
9. beacon Beacons a port. See page 52.
10. con Displays information on the connected device. See page 53.
11. who Displays information on the device that caused a
change notification. See page 53.
12. ialpa Displays the Initiator AL_PAs. See page 53.
13. .. Returns to the previous menu. See page 10.
14. ? Displays additional information on a command. See page 10.