IBM TotalStorage FAStT700, Руководство пользователя

Страница: 28 / 100

DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following. Laser radiation when open. Do not stare into the
beam, do not view directly with optical instruments, and avoid direct
exposure to the beam.
1. Read the information in “Handling fiber-optic cables” on page 3.
2. Connect an LC-LC cable to an SFP module in the FAStT700 Storage Server
mini hub. For instructions, see “Connecting an LC-LC cable to an SFP module”
on page 5.
3. Remove the two protective caps from the LC connector end of the LC-SC cable,
as shown in Figure 12. Save the protective caps for future use.
4. Carefully insert one end of an LC-LC cable into the LC connector end of the
LC-SC cable. Push in the connector until it clicks into place.
5. Connect the SC connector end of the LC-SC cable to one of the following
devices:
v
Optical interface connector on an IBM FAStT Host Bus Adapter (Part number
00N6881)
v
GBIC installed in a FAStT EXP500 expansion unit (Machine type 3560)
v
1 Gb Fibre Channel switch (Machine type 2109)
v
1 Gb Fibre Channel managed hub (Machine type 3534)
Figure 12. Removing the LC-SC cable adapter protective caps
Figure 13. LC-LC cable connected into the LC-SC cable adapter
10
IBM
®
TotalStorage
™
FAStT700 Fibre Channel Storage Server: User’s Guide