5. Unpack the new mini hub and slide it into the appropriate slot; then, tighten the
captive screw.
6. Install the SFP modules that you removed in Step 3a on page 54 as follows:
a. Remove the SFP modules from their static-protective packages.
b. Remove the protective caps from the SFP modules.
c. Slide the SFP modules into the mini-hub ports.
7. Replace the fiber-optic cables that you removed in Step 1 on page 56.
8. Check the indicator lights on the mini hub.
When the mini hub is operating properly, the green loop good light is lit and the
fault light is off. If the mini-hub port is active, the amber port bypass light is not
lit. For more information see “Mini-hub indicator lights” on page 27. If a problem
is indicated, use the storage-management software to check the FAStT700
Storage Server status.
58
IBM
®
TotalStorage
™
FAStT700 Fibre Channel Storage Server: User’s Guide
Содержание TotalStorage FAStT700
