IBM TotalStorage FAStT EXP700, Инструкция по установке и эксплуатации

Страница: 47 / 100

Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product could
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
v
Use of controls or adjustments or performance of procedures other than
those specified herein might result in hazardous radiation exposure.
DANGER
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
1. Read the information in “Handling fiber-optic cables” on page 23.
2. Connect one end of an LC-LC cable to an SFP module in the FAStT EXP700.
For instructions, see “Installing SFP modules” on page 20.
3. Remove the two protective caps from the LC connector end of the LC-SC cable
adapter as shown in Figure 24. Save the protective caps for future use.
4. Carefully insert the other end of the LC-LC cable into the LC connector end of
the LC-SC cable adapter as shown in Figure 25 on page 28. Push in the
connector until it clicks into place.
Figure 24. Removing the LC-SC cable adapter protective caps
Chapter 2. Installing the FAStT EXP700
27