IBM TotalStorage FAStT EXP700, Инструкция по установке, использованию и обслуживанию

Страница: 127 / 158

b. The Add Device window opens. Enter the TCP/IP address of Controller B in
the Host name or IP address field and click Add to add the DS4000 storage
server in the DS4000 Storage Manger Client management domain.
c. Click Close to close the Add Device window.
Note: If this is an upgrade from an existing DS4000 storage server with version
5.4x.xx.xx firmware or earlier and there is an entry for this DS4000
storage server in the DS4000 Storage Manger Client Enterprise
Management window, delete this entry before you add controller B to the
Enterprise Management window.
To delete the entry, right-click the entry and select Remove Device from
the pull-down menu. Click Yes when the Remove Device confirmation
window opens.
When you are done, continue to “Downloading the firmware to controller B.”
Downloading the firmware to controller B
Perform the following steps to download the firmware and NVSRAM to controller B
of the DS4000 Storage Server:
1. In the Enterprise Management window, right click the DS4000 storage server
name and select Manage Device to open the Subsystem Management
window.
Note: A Partially Managed Notice window might open, warning that the
storage subsystem that you are trying to manage has a controller that
has not yet been added to the Enterprise Management window. Click
Yes to launch the Subsystem Management window for this DS4000
controller anyway.
2. In the Subsystem Management window, click Storage Subsystem →
Download → NVSRAM to load the NVSRAM file to Controller B. When the
NVSRAM Download window opens.
3. Select the directory that contains the NVSRAM file, then select the name of
the NVSRAM file. Click OK to close the window and continue.
4. Click Yes when the Confirm Download window opens. The Confirm Download
window closes and the Downloading window opens and shows the status of
the firmware download.
5. One of two windows displays:
v If you receive the message NVSRAM download successful displayed in the
Downloading window, click Done to close the Downloading window and then
continue with step 6 on page 96.
v If you see an error window displaying a Controller Download Timeout error,
power off and then power on the DS4000 storage server. Then verify that
the NVSRAM was downloaded correctly to Controller B of the storage
server.
To verify that the correct NVSRAM version was downloaded, click View
→
Storage Subsystem Profile . In the Storage Subsystem Profile window, look
for the correct NVSRAM file version under the All tab.
– If the NVSRAM was downloaded correctly, continue with step 6 on page
96.
Appendix C. Upgrading the controller firmware for DS4300, DS4400, and DS4500 (DS4000 EXP710 only)
95