IBM TotalStorage 3580 L33, Руководство по установке, эксплуатации и обслуживанию

Страница: 119 / 143

1
Loader motor worm gear
6
Threader mechanism gear
2
Cartridge loader tray guide
bearing
7
Lever
3
Rotator stub
8
Loader mechanism gear
4
Threader motor worm gear
9
Threader worm gear
5
Threader intermediate gear
__ Step 7.
As the tape leader block assembly (LBA) is secured in the cartridge,
you should hear the LBA retention spring clips click into place. If you
do not hear the click, continue rolling until the threader motor worm
gear (
4
in Figure 39) stops. The LBA is in the correct position.
Note: Be sure to keep tension on the tape as the LBA is drawn into
the cartridge by using a hex wrench as shown in Figure 38 on
page 100.
__ Step 8. Notice the:
a. Loader mechanism gear (
8
in Figure 39) nearest the front of the
drive that actuates the cartridge loader mechanism.
b.
Position of the rotate stub (
3
in Figure 39).
c. Front loader motor worm gear (
1
in Figure 39). Rotating this
gear allows the loader mechanism gear (
8
in Figure 39) to turn.
__ Step 9. Rotate the loader motor worm gear (
1
in Figure 39) to turn the
threader mechanism gear (
6
in Figure 39) counterclockwise.
Continue turning until the rotator stub (
3
in Figure 39) loses contact
with the lever (
7
in Figure 39). This releases the LBA leader pin.
a82ru009
1
2
3
4
5
6
7
8
9
Figure 39. Drive with cover removed to reveal gear train.
Appendix E. Information for Authorized Service Personnel
101