Troubleshooting
Troubleshooting
Error codes or messages
Note:
1. In the charts, x can represent any character.
2. The version of PC-Doctor referred to here is PC-Doctor for
Windows.
Message
Cause and action
0175: Bad CRC1, stop POST task
The EEPROM checksum is not correct (block #6). Have the computer
serviced.
0187: EAIA data access error
The access to EEPROM is failed. Have the computer serviced.
0188: Invalid RFID serialization infor-
mation area or bad CRC2.
The EEPROM checksum is not correct (block # 0 and 1, or block # 6).
The system board should be replaced, and the box serial number
needs to be reinstalled. Have the computer serviced.
0189: Invalid RFID configuration infor-
mation area
The EEPROM checksum is not correct (block # 4 and 5). The system
board should be replace, and the UUID needs to be reinstalled. Have
the computer serviced.
0190: Critical low-battery error
The computer turned off, because the battery is low. Connect the ac
adapter to the computer and charge the battery pack, or replace the
battery pack with a fully charged one.
0193: RF antenna has been removed
The RFID antenna that you installed has been removed. Enter the
supervisor password to return your computer to the normal operation.
0194: The computer is carried through
the security gate
The computer have been carried through the security portal gate. Enter
the supervisor password to return your computer to the normal opera-
tion.
0200: Hard disk error
The hard disk is not working. Make sure the hard disk drive is attached
firmly. Run the BIOS Setup Utility; then make sure the hard disk drive
is not disabled in the Startup menu.
30
ThinkPad X20 User's Reference
Содержание ThinkPad X20
Страница 1: ...i...
Страница 10: ...6 ThinkPad X20 User s Reference...
Страница 26: ...22 ThinkPad X20 User s Reference...
Страница 58: ...Getting Service 54 ThinkPad X20 User s Reference...