IBM ThinkPad 755CX, Руководство по эксплуатации пользователя

Страница: 71 / 296

Using Power Management
DOS
For DOS:
1
If a hibernation file has not been created on the hard
disk, type PS2 HFILE
X; then press Enter to create a
hibernation file.
2
Type PS2 SA E at the command prompt; then press
Enter to enter safe suspend mode.
PS2 command:
Page 41.
Considerations for Suspend Mode
Consider the following before using suspend mode:
Attached devices, such as a printer or serial device, stop
running when the computer enters suspend mode. When
normal operation is resumed, the output can differ from what
you expect, because the device might be reset or lose its
configuration settings.
When a power-on or hard-disk password is set, you must enter
your password to resume normal operation.
The computer can enter suspend mode when used with the
following operating systems:
– DOS Version 7.0 or later
– OS/2 Version 2.11 or later
– Microsoft Windows Version 3.11 with DOS Version 7.0 or
later
Important
When you use Windows Version 3.11, ensure that Advanced
Power Management (APM) is installed according to the
instructions in “Microsoft Windows Version 3.11 or Later” on
page 177.
Note:
When the computer enters standby
mode, you will hear a beep that is
different from the one that sounds
when entering suspend mode. When the computer is powered with ac power and is using one
of the following IBM PC Cards, it enters standby mode:
– IBM 3270 Emulation Credit Card Adapter
– IBM 5250 Emulation Credit Card Adapter
– IBM Token-Ring 16/4 Credit Card Adapter
– IBM Credit Card Adapter for Ethernet
When other PC Cards are used, all application programs stop,
and for some of these PC Cards the power to the PC Cards
might also turn off.
Chapter 3. Operating Your Computer
55
All manuals and user guides at all-guides.com
all-guides.com