IBM System x3650 M4 Type 7915 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 192

IBM System x3650 M4 Type 7915 Скачать руководство пользователя страница 22

documentation that comes with the server, and the documentation might be updated
occasionally to include information about those features, or technical updates might
be available to provide additional information that is not included in the server
documentation. To check for updates, go to http://www.ibm.com/supportportal/.

Record information about the server in the following table.

Product name

IBM System x3650 M4 server

Machine type

7915

Model number

_____________________________________________

Serial number

_____________________________________________

The model number and serial number are on the ID label on the bezel, as shown in
the following illustration.

Note:

The illustrations in this document might differ slightly from your hardware.

ID label

You can download an IBM

ServerGuide Setup and Installation

CD to help you

configure the hardware, install device drivers, and install the operating system.

For a list of supported optional devices for the server, see http://www.ibm.com/
servers/eserver/serverproven/compat/us/.

See the

Rack Installation Instructions

document on the IBM

Documentation

CD for

complete rack installation and removal instructions.

The IBM System x Documentation CD

The IBM

System x Documentation

CD contains documentation for your server in

Portable Document Format (PDF) and includes the IBM Documentation Browser to
help you find information quickly.

Hardware and software requirements

The IBM

Documentation

CD requires the following minimum hardware and

software:

v

Microsoft Windows XP, Windows 2000, or Red Hat Linux

v

100 MHz microprocessor

v

32 MB of RAM

v

Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating
systems

4

System x3650 M4 Type 7915: Installation and User’s Guide

«
...
20
21
22
23
24
...
»

Содержание System x3650 M4 Type 7915

































































































































































































Отзывы:

Нет отзывов