IBM System Storage EXP2512 Express Storage Enclosure Скачать руководство пользователя | Manualshive

Страница: 13 / 72

background image

Chapter 1. Introduction

This Installation, User’s, and Maintenance Guide contains instructions for setting up
your IBM System Storage

®

EXP2512 Express Storage

™

Enclosure and IBM System

Storage EXP2524 Express Storage Enclosure and provides the instructions for
replacing components. The IBM System Storage EXP2512 and IBM System
Storage EXP2524 are referred to in this document as the EXP2500, unless
specified otherwise.

This document contains information about:

v

Setting up and cabling the EXP2500

v

Starting and configuring the EXP2500

v

Replacing components

v

Solving problems

The EXP2500 provides high-capacity, Serial Attached SCSI (SAS), nearline SAS, or
Solid State disk storage. The EXP2512 supports up to 12 SAS or nearline SAS
hard disk drives and the EXP2524 supports up to 24 SAS, nearline SAS, or Solid
State hard disk drives. The EXP2500 delivers fast, high-volume data transfer,
retrieval, and storage functions among multiple drives. The EXP2500 is designed
for continuous, reliable service; the modular, redundant hard disk drives and power
supplies (with fans) use hot-swap technology for easy replacement without turning
off the EXP2500.

The EXP2500 comes with two 800-watt ac power supplies, one environmental
services module (ESM), a filler panel to cover the empty ESM bay, and 12 or 24
drive filler panels, depending on the storage enclosure model. The drive filler panels
can be replaced with optional hard disk drives.

If firmware and documentation updates are available, you can download them from
the IBM support website. The EXP2500 might have features that are not described
in the documentation that comes with the unit, and the documentation might be
updated occasionally to include information about those features, or technical
updates might be available to provide additional information that is not included in
the EXP2500 documentation.

Note: Changes are made periodically to the IBM website. Procedures for locating
firmware and documentation might vary slightly from what is described in this
document.

To check for updates, go to http://www.ibm.com/systems/support/. For firmware
updates, click Downloads. For documentation updates, click Documentation.

The EXP2500 comes with a limited warranty. For more information about the terms
of your warranty, see the Warranty and Support Information document that comes
with the EXP2500.

© Copyright IBM Corp. 2010, 2011

1

«
...
11
12
13
14
15
...
»

Содержание System Storage EXP2512 Express Storage Enclosure









































































Отзывы:

Нет отзывов

Похожие инструкции для System Storage EXP2512 Express Storage Enclosure

Бренд: Fender Страницы: 12

Бренд: D.A.S. Страницы: 24

Бренд: Vantec Страницы: 23

Бренд: Thermaltake Страницы: 14

Armor+ MX LCS VH8000 Series

Бренд: Thermaltake Страницы: 17

Sonasafe HM100NP

Бренд: Solflex Страницы: 25

Safe-T-Cover 800S Series

Бренд: HYDROCOWL Страницы: 4

Бренд: Icy Box Страницы: 16

Бренд: Daikin Страницы: 12

Бренд: Daikin Страницы: 12

Бренд: Daikin Страницы: 16

Бренд: Circa Enterprises Страницы: 16

Бренд: 1life Страницы: 18

SmartRack SRW10US

Бренд: Tripp Lite Страницы: 3

Бренд: Raidon Страницы: 15

Бренд: HornetTek Страницы: 16

Бренд: TSI Instruments Страницы: 70

Бренд: GAMDIAS Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды