IBM System Storage DS4000, Планирование и руководство по установке

Страница: 25 / 44

Chapter 2. Installing the DS4000 Alert Manager Appliance
This chapters provides the installation procedure for the DS4000 Alert Manager
Appliance.
This chapter discusses the following topics:
v “Handling static-sensitive devices”
v
“Installing the DS4000 Alert Manager Appliance”
v “Adding additional DS4000 storage servers to an existing DS4000 Alert Manager
Appliance configuration” on page 9
Handling static-sensitive devices
Attention: Static electricity can damage electronic devices and your system. To
avoid damage, keep static-sensitive devices in their static-protective packages until
you are ready to install them.
To reduce the possibility of electrostatic discharge (ESD), observe the following
precautions:
v
Limit your movement. Movement can cause static electricity to build up around
you.
v Handle the device carefully, holding it by its edges or its frame.
v
Do not touch solder joints, pins, or exposed printed circuitry.
v
Do not leave the device where others can handle and possibly damage the
device.
v While the device is still in its static-protective package, touch it to an unpainted
metal part of the system unit for at least two seconds. This drains static electricity
from the package and from your body.
v
Remove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it in its
static-protective package. Do not place the device on your system unit cover or
on a metal table. Take additional care when handling devices during cold weather
because heating reduces indoor humidity and increases static electricity.
Installing the DS4000 Alert Manager Appliance
Statement 4:
≥
18 kg (39.7 lb)
≥
32 kg (70.5 lb)
≥
55 kg (121.2 lb)
© Copyright IBM Corp. 2005
5