IBM Storwize V3500, Быстрое руководство по установке

Страница: 53 / 78

Chapter 3. Configuring the system
After installing and powering up a new system, you must initialize it before using
it.
The following instructions use the supplied USB flash drive to initialize the system.
If you are not authorized to use a USB flash drive in your situation, refer to the
“Troubleshooting” section of the IBM Knowledge Center. This topic describes how
to make an Ethernet connection to the enclosure and to initialize the system by
using the service assistant GUI.
After initializing the system, you will use the Storwize management GUI to
complete the configuration procedures.
v The management GUI requires a supported web browser (see “Checking your
web browser settings for the management GUI”).
v To configure a new system, you will log on to the management GUI with the
default user name and password (see “User name and password for system
initialization”).
The steps for initializing a new system vary, depending on the operating system of
the computer you use for the procedure.
v For Microsoft Windows, refer to “Initializing the system with a Microsoft
Windows computer” on page 35.
v For Apple MacOS, refer to “Initializing the system with an Apple Macintosh
computer” on page 37.
v For Linux, refer to “Initializing the system with a Linux computer” on page 39.
Checking your web browser settings for the management GUI
To access the management GUI, you must ensure that your web browser is
supported and has the appropriate settings enabled.
Before you begin
The management GUI supports the following web browsers:
v Mozilla Firefox 41
v Mozilla Firefox Extended Support Release (ESR) 38
v Microsoft Internet Explorer (IE) 11 and Microsoft Edge
v Google Chrome 46
IBM supports higher versions of the browsers if the vendors do not remove or
disable function that the product relies upon. For browser levels higher than the
versions that are certified with the product, customer support accepts usage-related
and defect-related service requests. If the support center cannot re-create the issue,
support might request the client to re-create the problem on a certified browser
version. Defects are not accepted for cosmetic differences between browsers or
browser versions that do not affect the functional behavior of the product. If a
problem is identified in the product, defects are accepted. If a problem is identified
with the browser, IBM might investigate potential solutions or work-arounds that
the client can implement until a permanent solution becomes available.
© Copyright IBM Corp. 2012, 2015
31