![IBM ServeRAID-MR10is Скачать руководство пользователя страница 44](http://html2.mh-extra.com/html/ibm/serveraid-mr10is/serveraid-mr10is_user-manual_3449238044.webp)
2-10
ServeRAID-MR10is SAS/SATA Controller Hardware Installation
Note:
See the
Warranty and Support Information
document for
the replacement battery part number and battery-disposal
instructions.
Follow these steps to replace a failed controller with data in the
transportable battery backup unit.
Step 1. Review all safety information provided with the server; then,
power down the server and the drives.
Step 2. Remove the failed controller from the system.
Step 3. Remove the iBBU from the failed controller.
Step 4. Insert the iBBU into the replacement controller.
Step 5. Insert the replacement controller into the system.
Step 6. Turn on the power to the system.
The controller then reads the disk configuration into NVRAM
and flushes cache data to the virtual disks.
2.6
After Installing the ServeRAID-MR10is Controller
After the ServeRAID-MR10is controller installation, you must configure
the ServeRAID-MR10is controller and install the operating system driver.
The
ServeRAID-MR Software User’s Guide
instructs you on the
configuration options and how to set them on your ServeRAID-MR10is
controller. The
ServeRAID-MR Device Driver Installation User’s Guide
provides detailed installation instructions for operating system drivers.
Содержание ServeRAID-MR10is
