IBM ServeRAID-MR10is Скачать руководство пользователя страница 36

Страница: 36 / 94

2-2

ServeRAID-MR10is SAS/SATA Controller Hardware Installation

2.2

Quick Installation

The following steps are for quick ServeRAID-MR10is controller
installation. These steps are for experienced computer users/installers.

Section 2.3, “Detailed Installation,”

contains the steps for all others to

follow.

Step 1. Review all safety information provided with the server. Turn off

the server and all attached devices, and unplug the server and
the device power cords.

Step 2. Open the cabinet of the host system by following the

instructions in the host system technical documentation.

Step 3. Check the intelligent Battery Backup Unit (iBBU) on the

controller.

Step 4. Install the ServeRAID-MR10is controller in the computer and

connect the SAS devices or SATA II devices to it. Make sure
that the cables you use conform to all specifications.

Step 5. Perform a safety check.

a. Make sure that all cables are properly attached

b. Make sure that the ServeRAID-MR10is controller is

installed correctly

c. Close the cabinet of the host system

Step 6. Reconnect the power cords to the system and to all of the

attached devices.

Step 7. Turn on the power to the system after you complete the safety

check.

2.3

Detailed Installation

This section provides detailed instructions for installing a ServeRAID-
MR10is controller.

Step 1. Unpack the ServeRAID-MR10is Controller

Unpack and remove the controller. Inspect it for damage. If it
appears damaged, or if any of the following items are missing,

Содержание ServeRAID-MR10is































































































Результаты поиска

Содержание ServeRAID-MR10is

Отзывы:

Похожие инструкции для ServeRAID-MR10is

Бренды по названию

Популярные бренды

IBM ServeRAID-MR10is, Руководство пользователя

Результаты поиска

Содержание ServeRAID-MR10is

Отзывы:

Похожие инструкции для ServeRAID-MR10is

Бренды по названию

Популярные бренды