IBM SAN50C-R, Инструкция по установке, обслуживанию и эксплуатации

Страница: 59 / 86

To install the IBM SAN50C-R switch on top of the shelf brackets, follow these
steps.
1.
Verify that the shelf brackets are level and securely attached to the
rack-mounting rails, and the rack is stabilized.
2. Slide the Slide the IBM SAN50C-R switch onto the shelf brackets, ensuring that
it is squarely positioned.
3. Attach the IBM SAN50C-R switch to the rack-mounting rails. Slide the clip nuts
over the holes on the non-threaded rails on the rack. These clip nuts provide
the threading for the screws that will secure the chassis to the rack. Use the12
10-32 x 1/2 inch screws provided in this shelf bracket kit to secure the chassis
to the rack.
CAUTION:
IBM recommends grounding the chassis, although the rack is already grounded.
There is a grounding pad with two threaded M4 holes on the chassis for
attaching a grounding lug.
Chapter 3. Cabinet and Rack Installation
35