IBM SAN Volume Controller 2145-SV1, Руководство по установке оборудования

Страница: 180 / 194

Table 27. Physical specifications (continued)
Environment Temperature Altitude Relative humidity
Maximum dew
point
Turned off (with
standby power)
5°C to 45°C
(41°F to 113°F)
0 m to 3,050 m
(0 ft to 10,000 ft)
8% to 85% 27°C (80.6°F)
Storing 1°C to 60°C
(33.8°F to
140.0°F)
0 m to 3,050 m
(0 ft to 10,000 ft)
5% to 80% 29°C (84.2°F)
Shipping -40°C to 60°C
(-40°F to 140.0°F)
0 m to 10,700 m
(0 ft to 34,991 ft)
5% to 100% 29°C (84.2°F)
Note: Decrease the maximum system temperature by 1°C for every 175 m increase in altitude.
Preparing your environment
The following tables list the physical characteristics of a SAN Volume Controller 2145-SV1 node.
Dimensions and weight
Use the parameters that are shown in Table 28 on page 148 to ensure that space is available in a rack
capable of supporting the node.
Table 28. Dimensions and weight
Height
Width Depth Maximum weight
87 mm (3.4 in.) 447 mm (17.6 in) 746 mm (30.1 in) 25 kg (55 lb) to 30 kg
(65 lb) depending on
configuration
Additional space requirements
Ensure that space is available in the rack for the additional space requirements around the node, as
shown in Table 29 on page 148.
Table 29. Additional space requirements
Location
Additional space requirements Reason
Left side and right side Minimum: 50 mm (2 in.) Cooling air flow
Back Minimum: 100 mm (4 in.)
If the cable-management arm is
used, allow 177 mm (7 in.)
Cable exit
Maximum heat output of each SAN Volume Controller 2145-SV1 node
The node dissipates the maximum heat output that is given in Table 30 on page 149.
148 SAN Volume Controller : Model 2145-SV1 Hardware Installation Guide