![background image](http://html1.mh-extra.com/html/ibm/san-volume-controller-2145-8f2/san-volume-controller-2145-8f2_hardware-installation-manual_3416813009.webp)
Safety and environmental notices
Review the multilingual safety notices for the IBM
®
System Storage
™
SAN Volume
Controller, redundant ac-power switch, and the uninterruptible power supply
before you install and use the product.
To find the translated text for a caution or danger notice:
1.
Look for the identification number at the end of each caution notice or each
danger notice. In the following examples, the numbers (C001) and (D002) are
the identification numbers.
CAUTION:
A caution notice indicates the presence of a hazard that has the potential of
causing moderate or minor personal injury. (C001)
DANGER
A danger notice indicates the presence of a hazard that has the potential
of causing death or serious personal injury. (D002)
2.
Locate
IBM Systems Safety Notices
with the user publications that were provided
with the SAN Volume Controller hardware.
3.
Find the matching identification number in the
IBM Systems Safety Notices
. Then
review the topics concerning the safety notices to ensure that you are in
compliance.
4.
Optionally, read the multilingual safety instructions on the SAN Volume
Controller Web site. Go to www.ibm.com/storage/support/2145, click the
current product documentation link, and then click
Multi-language
.
Inspecting the SAN Volume Controller for unsafe conditions
Use caution when working in any potential safety hazardous situation that is not
covered in the safety checks. If unsafe conditions are present, determine how
serious the hazards are and whether you can continue before you correct the
problem.
Before you start the safety inspection, make sure that the power is off, and that the
power cord is disconnected.
Each device has required safety items installed to protect users and IBM service
personnel from injury. This guide addresses only those items.
Important:
Good judgment must also be used to identify potential safety hazards
due to the attachment of non-IBM features or options not covered by
this inspection guide.
If any unsafe conditions are present, you must determine how serious the apparent
hazard could be and whether you can continue without first correcting the
problem. For example, consider the following conditions and their potential safety
hazards:
Electrical hazards (especially primary power)
Primary voltage on the frame can cause serious or lethal electrical shock.
© Copyright IBM Corp. 2003, 2008
vii
Содержание SAN Volume Controller 2145-8F2
