IBM Remote Supervisor Adapter, Руководство пользователя, Страница: 72 / 124

Use the following keys to navigate through the windows in the text-based interface:
v Press the Up Arrow and Down Arrow keys ( ↑ and ↓ ) to navigate the Advanced
System Management window.
v Press Esc to exit to the Advanced System Management window.
v
Press Esc at the Advanced System Management window to log off from your
session.
v Press F3 to exit the window you are viewing.
v
Press F4 or press Enter to save your changes.
Accessing the text-based interface through a direct serial connection
Complete the following steps to set up a direct serial connection:
1. Connect a null modem cable to the serial port of the Remote Supervisor
Adapter.
2. Connect the other end of the cable to a COM port on the client computer.
3. Start a terminal emulation program on the client computer such as Hilgraeve
HyperTerminal.
4. Click File
→
Properties . The New Connection Properties window opens.
5. Click Configure and set the following values:
Table 17. COM properties
Field Entry
Bits per second 57600
Data bits 8
Parity None
Stop bits 1
Flow control None
6. Click OK .
7. Click the Settings tab.
8. From the Emulation field, select Terminal Keys and ANSI .
9. Click OK .
10. Click View → Font .
11. Select the Terminal font with a point size of 9.
12. Click OK .
13. Press Esc to begin your session. The login prompt opens.
14. Enter your login ID and password and click OK .
The Advanced System Management window opens.
Configuring terminal settings
Complete the following steps to properly display special characters in the text-based
user interface:
66
Remote Supervisor Adapter: User’s Guide