IBM Redbooks ServeRAID-MR10i, Руководство пользователя

Страница: 57 / 86

Installing the iBBU on the ServeRAID-MR10i Controller 5-5
Attention: Never apply pressure to the iBBU when you insert the
controller. Instead, press down only on the top edge of the
controller, as shown in
Figure 5.3 .
Figure 5.3 Installing the ServeRAID-MR10i SAS/SATA Controller
8. Attach the controller to the computer chassis with the bracket screw.
9. Attach the cables, as needed, to the connectors on the controller.
10. Reinstall the computer cover and reattach the power cords.
11. Turn on the power to the computer.
Attention: See the ServeRAID-MR Software User’s Guide for
information about running the RAID configuration utility and
installing software drivers.
85022-07
Bracket Screw
Edge of
Motherboard
Edge of Motherboard
Press Here
Press Here
iBBU (Top View)