IBM Redbooks ServeRAID-MR10i, Руководство пользователя

Страница: 62 / 86

6-4 Using the Intelligent Battery Backup Unit
Figure 6.3 Battery Module Screen
Most of the Battery Module properties are view-only and are self-
explanatory.
In the lower right corner of the screen are the Auto Learn options. A
learning cycle is a battery calibration operation performed by the
controller periodically to determine the condition of the battery. You
can change the learn delay interval and the auto learn mode.
Note: IBM recommends leaving the the learn delay interval and
the auto learn mode at their default settings.
– Setting the Learn Delay Interval – The learn delay interval is the
length of the interval between automatic learning cycles. Perform the
following steps to change the interval:
1. Open the drop-down menu in the Auto Learn Mode field.
2. Set the learn mode as
Auto
(the default).
3. Change the number of hours in the Learn Delay Interval field.
You can delay the start of the learn cycles for up to 168 hours (7
days).
4. Click Go