IBM Redbooks ServeRAID-MR10i, Руководство пользователя

Страница: 38 / 86

2-6 ServeRAID-MR10i SAS/SATA Controller Hardware Installation
by the operating system manufacturer and to review the
readme
file that accompanies the driver.
2.4 SAS Device Cables
This section describes the cables used on the RAID controller and
provides step-by-step instructions for connecting SAS physical disks
and/or SATA II physical disks to the controller. The SAS protocols and
SATA II protocols use a thin, 7-wire connector instead of the 68-wire
SCSI cable or 26-wire ATA cable.
Note: Use only straight SAS cables, not cross-over SAS cables.
Figure 2.2 displays the SAS cable that connects the internal connectors
on a RAID controller to SAS drives.
Figure 2.2 Internal SAS Cable for Connection to SAS Physical
Disks or SATA II Physical Disks
Figure 2.3 displays the SATA II device plug connector used to connect
a RAID controller with internal connectors to the host receptable
Physical Disk
Connector
Serial Signal
Cables
RAID Controller to HDD
4-Lane Internal
Connector
SFF 8484
Breakout Cable