IBM RackSwitch G8264CS, Руководство по установке

Страница: 25 / 70

Table 5. RJ-45 LEDs status
LED Steady green Flash green Off
Link Valid link Activity No link
Speed 100 / 10000 Mbps Not applicable 10 Mbps
SFP+ LEDs
Status LEDs for the SFP+ ports are located on the front panel and are described in
the following table.
Table 6. SFP+ LEDs status
LED Steady green Flash green Off
SFP+ link Valid link Activity No Link
SFP+ speed 10 Gb SFP+ Not applicable 1 Gb SFP
QSPF+ LEDs
The QSFP+ LEDs are shown in the following illustration.
Status LEDs for the QSFP+ ports are described in the following table. When the
port is 40 GbE mode, only the first LED applies. When the port is in 4 x 10 GbE
mode, each LED provides status for its corresponding 10 GbE port, as noted in the
following table.
Table 7. QSFP+ LEDs status
LED Steady green Flash green Off
QSFP+ link Valid link Activity No Link
QSFP+ speed 10 Gb SFP+ Not applicable 1 Gb SFP
Technical specifications
The RackSwitch G8624CS technical specifications are described in the following
sections.
Physical characteristics
The physical characteristics of the RackSwitch G8264CS are listed in the following
table.
Table 8. Physical characteristics
Specification Physical characteristics
Dimensions (H x W x D) 4.45 x 43.9 x 51.6 cm.
(1.75 x 17.3 x 20.2 in.)
Weight 11.1 kg. (24.5 lb) (maximum)
Airflow Front-to-rear, rear-to-front
5 13
9 1
9 1
13 5
8 16
12 4
7 15
11 3
6 14
10 2
RackS witch G8264
! S
Mgmt
Figure 6. QSFP+ LEDs
Chapter 1. Introduction
11