IBM Proventia Management SiteProtector SP2001, Руководство по конфигурации оборудования

Страница: 40 / 57

Chapter 4. Configuring the SiteProtector Console
After you connect and configure the SiteProtector SP2001 appliance hardware, you
must perform additional configuration tasks in the SiteProtector Console. This
chapter provides procedures for using the Console to perform these tasks.
Important: If you used the procedures in the SiteProtector SP2001 Getting Started
Card to connect the SiteProtector SP2001 appliance, start here to continue the
configuration process.
Topics
“SiteProtector Console Configuration Checklist”
“Installing License Files” on page 20
“Choosing the SP2001 Appliance Language” on page 20
“Securing SP2001 Appliance Passwords” on page 21
“Setting the Date and Time” on page 22
SiteProtector Console Configuration Checklist
This topic provides a checklist that lists the tasks you should perform to configure
the Console. Follow the steps in this topic when you configure the SiteProtector
SP2001 appliance.
Note: This checklist provides the recommended order that the tasks in this chapter
should be performed. This order may not always be required.
Checklist
Use the checklist in the following table as a guide to help you perform the tasks in
this chapter. As you perform tasks, use the check boxes to check off the tasks that
you have completed:
U
Task Description
h
1 Install the license files for the reporting, correlation, and security features.
See “Installing License Files” on page 20.
h
2 Select the SiteProtector SP2001 appliance language.
See “Choosing the SP2001 Appliance Language” on page 20.
h
3 Change the database and administrator passwords.
See “Securing SP2001 Appliance Passwords” on page 21.
h
4 Configure the date and time on the SiteProtector SP2001 appliance.
See “Setting the Date and Time” on page 22.
h
5 See the SiteProtector Configuration Guide to configure the SiteProtector
security management software.
© Copyright IBM Corp. 1994, 2008
19