IBM PCMCIA 28.8/14.4, Руководство пользователя

Страница: 35 / 45

Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company. The equipment
must also be installed using an acceptable method of connection. In come cases, the
company’s inside wiring associated with a single line individual service may be
extended by means of a certified connector assembly (telephone extension cord). The
customer should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian
maintenance facility designated by the supplier. Any repairs or alterations made by
the user to this equipment or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
For their own protection users should ensure that the electrical ground connections for
the power utility, telephone lines, and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.
IMPORTANT: Users should not attempt to make installation connections themselves,
but should contact the appropriate electric inspection authority or electrician.
Load Number
The Load Number (6.5) assigned to each terminal device denotes the percentage of
the total load to be connected to a telephone loop which is used by the device, to
prevent overloading. The termination on the loop may consist of any combination of
devices subject only to the requirement that the total of the Load Numbers of all the
devices does not exceed 100.
26
PCMCIA Data/Fax Modem Installation and Testing
Title: AOX0CNTL CreationDate: 04/03/95 10:49:21