IBM PCMCIA 28.8/14.4, Руководство пользователя

Страница: 24 / 45

Starting the Diagnostics Program for Windows and
DOS Users
1
Windows users exit to a DOS prompt.
DOS users begin at the command prompt.
2
If you selected the install option for the diagnostics program
during the Data/Fax Modem software installation, type
cd\v34modem and press Enter. Then, go to step 6.
Note: If you installed the modem software in a directory other
than v34modem, then type the name of that directory in place
of v34modem.
If you did not select the install option, continue with step 3.
3
Insert the Data/Fax Modem diskette in your computer’s
diskette drive.
4
Type a: (or the name of the diskette drive in which you have
inserted the diskette) and press Enter.
5
Type cd\dos and press Enter.
6
Type v34test and press Enter.
7
Follow the instructions as indicated.
If the tests run without errors, the Data/Fax Modem is ready for use.
If an error occurs, see “Problems While Testing the Data/Fax
Modem” on page 18.
Using and Testing the Data/Fax Modem
15
Title: AOX0CNTL CreationDate: 04/03/95 10:49:21