IBM PC 300 GL Type 6272, Руководство по установке, Страница: 69 / 94

3
Do one of the following:
a. To remove a drive from the 3.5-inch drive bracket, loosen and remove the
screws and then remove the drive. The following illustration shows a
drive being removed from bay 4.
b. To remove a drive from the 5.25-inch drive bracket, disconnect any cables
attached to the drive. Next, loosen and remove the screws and then slide
the drive forward. This illustration shows a drive being removed from
bay 2.
Screws
Screws
4
If you do not plan to use the removed drive, place it in a static-protective
package.
Note: If you are replacing the removed drive with a new drive, go to step 3
on page 51.
5
To remove another drive, repeat steps 3 and 4.
Chapter 5. Working with Internal Drives
55