IBM PC 300 GL Type 6272, Руководство по установке, Страница: 25 / 94

To install system memory:
1
Be sure the retaining clips are in the open position, as shown in the second
illustration below. If the retaining clips are perpendicular with the connector,
push outward on them until they click open.
2
Touch the static-protective package containing the system memory module to
any unpainted metal surface in the computer, and then remove the module
from the package.
3
Position the module above the connector so that the two notches on the
bottom edge of the module align properly with the connector.
4
Firmly push the module straight down into the connector until the retaining
clips pop up and snugly fit around both ends of the module.
Notches
Chapter 3. Installing Options on the System Board
11