manualshive.com logo in svg

IBM OpenCAPI, Установка и обслуживание

"IBM OpenCAPI - уникальный продукт, разработанный для установки и обслуживания высокотехнологичных устройств. Бесплатное скачивание руководства по эксплуатации доступно на manualshive.com. Не упустите возможность получить все необходимые инструкции и рекомендации для эффективного использования продукта."

Поделиться
Скачать
background image

or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications

could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Responsible Party:

International Business Machines Corporation

New Orchard Road

Armonk, NY 10504

Contact for FCC compliance information only: [email protected]

Class B Notices

The following Class B statements apply to features designated as electromagnetic compatibility (EMC)

Class B in the feature installation information.
When attaching a monitor to the equipment, you must use the designated monitor cable and any

interference suppression devices supplied with the monitor.

Canada Notice

CAN ICES-3 (B)/NMB-3(B)

European Community and Morocco Notice

This product is in conformity with the protection requirements of Directive 2014/30/EU of the European

Parliament and of the Council on the harmonization of the laws of the Member States relating to

electromagnetic compatibility. IBM cannot accept responsibility for any failure to satisfy the protection

requirements resulting from a non-recommended modification of the product, including the fitting of non-

IBM option cards.

German Notice

Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse B EU-Richtlinie zur

Elektromagnetischen Verträglichkeit
Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2014/30/EU zur Angleichung der

Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaatenund hält die

Grenzwerte der EN 55022/ EN 55032 Klasse B ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu

betreiben. Des Weiteren dürfen auch nur von der IBM empfohlene Kabel angeschlossen werden. IBM

übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne

Zustimmung von IBM verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern ohne

Empfehlung von IBM gesteckt/eingebaut werden.
Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Geräten
Dieses Produkt entspricht dem “Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG)

“. Dies ist die Umsetzung der EU-Richtlinie 2014/30/EU in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit

von Geräten (EMVG) (bzw. der EMC Richtlinie 2014/30/EU) für Geräte der Klasse B
Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen -

CE - zu führen.

Verantwortlich für die Einhaltung der EMV Vorschriften ist der Hersteller: 

International Business Machines Corp. 

New Orchard Road 

Notices  63

Содержание OpenCAPI



















































































Отзывы:

Нет отзывов

Похожие инструкции для OpenCAPI

Targus ACB20 User Manual preview
ACB20
Бренд: Targus Страницы: 103
Alps Electric miniSD SCHF Series Specification Sheet preview
miniSD SCHF Series
Бренд: Alps Electric Страницы: 2
Sena FreeWire SP29 User Manual preview
FreeWire SP29
Бренд: Sena Страницы: 25
UNICOM WEP-45020G-1 Quick Start Manual preview
WEP-45020G-1
Бренд: UNICOM Страницы: 7
Xantech RMZPR Installation Instructions preview
RMZPR
Бренд: Xantech Страницы: 2
Goobay 53782 User Manual preview
53782
Бренд: Goobay Страницы: 4
Proxim RangeLAN2 7401 Manual preview
RangeLAN2 7401
Бренд: Proxim Страницы: 101
Citel Portico TVA Series Installation And Configuration Manual preview
Portico TVA Series
Бренд: Citel Страницы: 109
Airlink101 AWLL6077V2 User Manual preview
AWLL6077V2
Бренд: Airlink101 Страницы: 47
Addonics Technologies AD2SAHDCF User Manual preview
AD2SAHDCF
Бренд: Addonics Technologies Страницы: 4
Wayne-Dalton Houseport USB Z-Wave WDUSB-10MAC User Manual preview
Houseport USB Z-Wave WDUSB-10MAC
Бренд: Wayne-Dalton Страницы: 38
Teknatool NOVA Comet Versaturn Instruction Manual preview
NOVA Comet Versaturn
Бренд: Teknatool Страницы: 16
Goobay 62104 User Manual preview
62104
Бренд: Goobay Страницы: 5
Belkin F5D7330 User Manual preview
F5D7330
Бренд: Belkin Страницы: 52
D-Link AirPro DWL-AB650 Installation Manual preview
AirPro DWL-AB650
Бренд: D-Link Страницы: 19
D-Link DFB-A5 Quick Installation Manual preview
DFB-A5
Бренд: D-Link Страницы: 13
D-Link DE-530CT+ Installation Manual preview
DE-530CT+
Бренд: D-Link Страницы: 21
D-Link AirPremier AG DWL-AG660 Manual preview
AirPremier AG DWL-AG660
Бренд: D-Link Страницы: 46

Бренды по названию

Популярные бренды

Загрузить еще бренды