IBM Nways 8260, Руководство по установке

Страница: 14 / 50

Before Unpacking the I/O Card
Take the following precautions before unpacking the I/O card:
Ÿ
Do not remove the component from its anti-static shielding bag until you are ready
to use it. This avoids the possibility of having electrostatic discharge damage
static-sensitive devices on the component.
Ÿ
When possible, handle the component by its faceplates.
Ÿ
Always use a foot strap and grounded mat or wear a grounded static discharge
wrist strap whenever you inspect or handle a component. Or else, be sure to
touch a grounded rack or another source of ground before handling it.
Ÿ
Ensure that you have a clean surface available on which to place the component.
Unpacking the Module or I/O Cards
When unpacking the I/O card, follow these steps:
1
Verify that the I/O card is the correct model by comparing the Feature
Code listed on the side of the shipping carton with the Feature Code you
ordered.
2
Remove the I/O card from its shipping carton.
3
Remove the I/O card from its anti-static bag and inspect it for damage.
Always handle it by the faceplate being careful not to touch the internal
components.
Be sure to keep the screws that come with the I/O card as you will need
them to install the card on the motherboard.
If the I/O card appears to be damaged, put it back in the anti-static bag,
and put the bag back into the shipping carton. Then contact your local IBM
dealer.
IBM suggests that you keep the shipping carton and the anti-static shielding bags in
which the I/O card was delivered in case you later want to repackage it for storage or
shipment.
IBM also suggests that you record the serial number of the I/O card and other
information about the modules, and keep safely with your WAN module details.
4
WAN 2/2.5 Modules: I/O Card Installation Guide