IBM NetVista 8302, Руководство по техническому обслуживанию аппаратной части

Страница: 118 / 314

POST Error Code FRU/Action
168
Alert on LAN error
1. Run Setup. Check to see that Ethernet
and Alert on LAN are enabled.
2. System Board
17X, 18X
1. C2 Security
175 Primary Copy of Secure Data is
damaged
1. Run Configuration. See “Setup Utility
program” on page 24.
2. System Board
176 The System has been tampered with
1. Covers were removed from the
computer
177
Corrupted Administrator Password
1. System Board
178
1. System Board
179 Boot Integrity Services Segment Error
1. System Board
183
1. Enter the administrator password
184
Asset Control Antenna not detected
1.
Make sure Asset Care and Asset ID are
enabled in Configuration/Setup
2. RFID Antenna
3. System Board
185
Corrupted boot sequence
1. Set configuration and reinstall the boot
sequence
186 Security Hardware Control Logic Error
1. System Board
187
1. Clear Administration password
2.
System Board
189
1. More than three password attempts
were made to access the computer
190
System Security: Invalid Remote Change
Requested
1. System Board
191 System Security: IBM Embedded
Security Hardware Reset
1. System Board
193 System Security: IBM Embedded
Security Hardware Removed
1. System Board
194 System Security: Asset ID Antenna has
been Removed
1. System Board
195 System Security: Asset ID Antenna has
been Installed
1. System Board
196 System Tampered Cleared
1. System Board
1XX
Not listed above
1. System Board
201, 20X
Memory data error
1. Run Enhanced Diagnostics Memory
Test
2. Memory Module
3.
System Board
112
Hardware Maintenance Manual