IBM NetVista 6644, Краткое руководство пользователя

Страница: 16 / 45

Note: There are two USB connectors on the front of the computer and
three USB connectors on the rear of the computer.
Keyboard
Mouse
3. Attach the monitor cable to the monitor (if it is not already attached),
then to the monitor connector and tighten the screws.
Note: If your computer has an SVGA monitor converter, it might
already be connected and it might look different than the one
shown here.
SVGA
Monitor DVI
Monitor
SVGA
Monitor
Converter
4. Connect the power cords to the computer and monitor and then plug
the cords into properly grounded electrical outlets.
Important
When the power cord is first plugged in, the computer might
power on for a few seconds, then power off. This is normal
operation.
5. Turn on the monitor and then turn on the computer. You see a logo
screen while the computer performs a short self-test. When the self-test
is done, the logo screen disappears and the operating system is loaded
(in models with preinstalled software).
Ÿ
If you have other optional devices to attach to your computer, go
to the next step.
Ÿ
Otherwise, go to “Finishing the installation” on page 6.
4
Quick Reference