background image

54

IBM Netfinity FAStT500 RAID Controller Enclosure Unit Installation Guide

IBM Statement of Warranty Worldwide except Canada, 
Puerto Rico, Turkey, United States (Part 1 - General Terms)

This Statement of Warranty includes Part 1 - General Terms and Part 2 - Country-unique Terms.The terms of Part 2 
may replace or modify those of Part 1. 
The warranties provided by IBM in this Statement of Warranty apply only to 
Machines you purchase for your use, and not for resale, from IBM or your reseller.The term “Machine” means an IBM 
machine, its features, conversions, upgrades, elements, or accessories, or any combination of them. The term 
“Machine” does not include any software programs, whether pre-loaded with the Machine, installed subsequently or 
otherwise.Unless IBM specifies otherwise, the following warranties apply only in the country where you acquire the 
Machine.Nothing in this Statement of Warranty affects any statutory rights of consumers that cannot be waived or 
limited by contract.If you have any questions, contact IBM or your reseller.

The IBM Warranty for Machines
IBM warrants that each Machine 1) is free from defects in materials and workmanship and 2) conforms to IBM’s 
Official Published Specifications. The warranty period for a Machine is a specified, fixed period commencing on its 
Date of Installation. The date on your sales receipt is the Date of Installation, unless IBM or your reseller informs you 
otherwise.

During the warranty period IBM or your reseller, if approved by IBM to provide warranty service, will provide repair 
and exchange service for the Machine, without charge, under the type of service designated for the Machine and will 
manage and install engineering changes that apply to the Machine.

If a Machine does not function as warranted during the warranty period, and IBM or your reseller are unable to either 1) 
make it do so or 2) replace it with one that is at least functionally equivalent, you may return it to your place of purchase 
and your money will be refunded. The replacement may not be new, but will be in good working order.

Extent of Warranty

The warranty does not cover the repair or exchange of a Machine resulting from misuse, accident, modification, 
unsuitable physical or operating environment, improper maintenance by you, or failure caused by a product for which 
IBM is not responsible. The warranty is voided by removal or alteration of Machine or parts identification labels.

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER 
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE 
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY 
ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO JURISDICTION. SOME 
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED 
WARRANTIES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN THAT 
EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRRANTY PERIOD. NO 
WARRANTIES APPLY AFTER THAT PERIOD.

Items Not Covered by Warranty 

IBM does not warrant uninterrupted or error-free operation of a Machine.

Unless specified otherwise, IBM provides non-IBM machines WITHOUT WARRANTIES OF ANY KIND. 

Machine: IBM Netfinity FAStT500 RAID Controller Enclosure Unit

Warranty Period*: Three Years

*Contact your place of purchase for warranty service information. Some IBM Machines are eligible for 
On-site warranty service depending on the country where service is performed.

Содержание Netfinity FAStT500




















































































Отзывы: