IBM Netfinity FAStT500, Руководство по установке

Страница: 29 / 83

Chapter 1. Getting started 13
Attention: When you handle electrostatic discharge (ESD) sensitive devices, take
precautions to avoid damage from static electricity. For details about
handling ESD-sensitive devices, refer to the following Web site and use a
search term of ESD: http://www.ibm.com/
3 Remove the CRUs, using Figure 8 through Figure 11 as guides.
Figure 8. Removing and replacing the controller fan and controllers
Figure 9. Removing and replacing the battery
Controller Fan (front view)
Pull up on the fan lever to unlock; then
grasp the lip handle and pull out firmly.
Controllers (front view)
Unlock and open the levers; then using the levers, pull out
the controller a couple inches. Grasp both sides of
the controller and remove it.
Important: To prevent data loss, replace Controller A
in the upper slot and Controller B in the lower slot.
Battery (front view)
Loosen the screws and pull out the battery a
few inches. Grasp both sides of the battery and
remove it.