IBM Netfinity 5100 8658 1RY, Руководство пользователя

Страница: 176 / 246

Error Code/Symptom FRU/Action
030-XXX-00N (Failed
SCSI test on PCI slot N.
Check system error log
before replacing a
FRU.)
1. Adapter
035-XXX-099
1. No adapters were found.
2. If adapter is installed re-check
connection.
035-XXX-S99 (Failed
RAID test on PCI slot S.
Check System Error
Log before replacing a
FRU.)
1. Cable
2. SCSI Backplane
3. Adapter
035-XXX-SNN (Check
System Error Log
before replacing a FRU.
NN = SCSI ID of failing
fixed disk.)
1. Fixed Disk with SCSI ID NN on
RAID adapter in PCI slot S.
035-253-S99 (RAID
adapter initialization
failure)
1. ServeRAID Adapter in slot S is
not configured properly.
Obtain
the basic and extended
configuration status and refer to the
ServeRAID Hardware Maintenance
Manual for more information.
2. Cable
3. SCSI Backplane
4. Adapter
075-XXX-000 (Failed
Power Supply test)
1. Power Supply
089-XXX-001 (Failed
Microprocessor test)
1. VRM 1
2. Microprocessor 1
089-XXX-002 (Failed
Optional Microprocessor
test)
1. VRM 2
2. Microprocessor 2
165-XXX-000 (Failed
Service Processor test)
1. System Board. Before replacing
the System Board, ensure that
System Board jumper J45 is not
installed (the default) when the
error occurs.
2. Power Backplane
3. Hot-Swap Drive Backplane
180-XXX-000
(Diagnostics LED
failure)
1. Run Diagnostic LED test for the
failing LED.
2. Power Switch Assembly
180-XXX-001 (Failed
information LED panel
test)
1. Information LED Panel
2. Diagnostic LED Panel
166
: Netfinity 5100 Type 8658 Models 11Y, 21Y, 31Y,
41Y, 51Y, 1RY, 2RY, 3RY, 4RY, 5RY