IBM Netfinity 5100 8658 1RY, Руководство пользователя

Страница: 107 / 246

Input/Output ports
This section provides information about the input/output
(I/O) ports on your server. These ports include the
following:
v One parallel port
v
One video port
v
Two Ultra3 SCSI ports
v
One keyboard port
v One auxiliary pointing device (mouse) port
v Two serial ports
v Two Universal Serial Bus (USB) ports
v One Ethernet port
v One Advanced System Management Interconnect port
Parallel port
Your server has one parallel port. This port supports three
standard Institute of Electrical and Electronics Engineers
(IEEE) 1284 modes of operation: Standard Parallel Port
(SPP), Enhanced Parallel Port (EPP), and Extended
Capability Port (ECP).
Viewing or changing the parallel-port
assignments
You can use the built-in Configuration/Setup Utility program
to configure the parallel port as bidirectional; that is, so
that data can be both read from and written to a device. In
bidirectional mode, the server supports the ECP and EPP
modes.
To view or change the parallel-port assignment:
1. Restart the server and watch the monitor screen.
2. When the message Press F1 for
Configuration/Setup
appears, press F1.
Note: The Devices and I/O Ports choice appears only
on the full configuration menu. If you set two
levels of passwords, you must enter the
administrator password to access the full
configuration menu.
3. From the main menu, select Devices and I/O Ports ;
then, press Enter.
4. Select the parallel port; then, use the arrow keys to
advance through the settings available.
Note: When you configure the parallel port as
bidirectional, use an IEEE 1284-compliant cable.
The maximum length of the cable must not
exceed 3 meters (9.8 feet).
Installing options
97