IBM Netfinity 5000, Руководство по установке и настройке

Страница: 10 / 24

1. Installing Hot-Swap Hard Disk Drives
If required, use the following procedure to install a hot-swap hard disk drive in your
Netfinity 5000 server.
1
Touch the static-protective bag containing the drive to any unpainted metal
surface on the server; then, remove the drive from the bag.
Note: The UltraSCSI controller and the backplane of the hot-swap bays
provide termination for the internal SCSI bus (cable) in your server.
There are no termination requirements for any SCSI devices you
install in the hot-swap bays or attach to this cable (bus).
2
Remove the filler panel
.1/
from one of the hot-swap bays. See the following
illustration.
For the location of the drives, see the illustrations on the following page.
3
Insert the drive
.2/
into the bay.
Ensure that the tray handle
.3/
on the drive is in the open position
(perpendicular to the drive).
4
Slide the drive assembly into the bay until it connects to the backplane; then,
move the handle to the locked (closed) position.
5
Continue with “2. Installing a Second Microprocessor” on page 8.
Tower Model
6
Netfinity 5000 Express Setup and Installation