IBM Netfinity 4500R, Руководство пользователя

Страница: 104 / 198

92
IBM® Netfinity® 4500R User’s Reference
Installing the server cover and trim bezel
Installing the server cover and bezel
Install ing the server cover an d trim bezel Note: The illustrations in this document might differ slightly from your hardware.
To install the server cover:
1. Place the cover-release latch in the open (up) position and align the flanges on the
left and right sides of the cover with the slots on the server chassis.
2. Close the cover-release latch.
To install the bezel:
1. Align the trim bezel with the front of the server.
2. Press inward on the top sides of the bezel and press the bezel toward the server
until it clicks into place.
To complete the installation:
If you disconnected any cables from the back of the server, reconnect the cables; then,
plug the power cords into properly grounded electrical outlets.
Connecting external options
Connecti ng exter nal opti ons You can attach external options to the input/output ports on the rear of the server. See
“Input/Output ports” for additional information.
To attach an external device:
1. Turn off the server and all attached devices.
2. Follow the instructions that come with the option to prepare it for installation and
to connect it to the server.
Note: If you are attaching an external SCSI device, see “SCSI cabling requirements”
on page 98 and “Setting SCSI IDs” on page 98.
Fan 3
Handle Fan 2
Fan 1 error LED
Fan 1