IBM NETFINITY 4000R, Руководство пользователя

Страница: 52 / 102

Note: The graphical user interface (GUI) program files for DMI Browser, ECC
Memory Setup, System Partition Access, RAID Manager, and Predictive
Failure Analysis will be installed regardless of whether the system has a
DMI Service Layer, ECC Memory, a System Partition, a RAID adapter,
or a PFA-enabled disk drive. This enables a network administrator to
remotely access these services on other systems within a network.
However, the base program that enables local use of the service will be
installed only if the required hardware or system configuration is
present.
11. Configure the Network Drivers.
If the installation configuration allows for network access, enter information
regarding the communication protocols that are supported by the system. The
Network Driver Configuration window will appear.
Figure 2. Netfinity Manager Installation — Network Driver Configuration Window
Follow these steps to continue configuring the system:
a. Enter a System Name.
Enter a name for the system in the System Name field. This name will
help other Netfinity Manager users identify the system on the network.
b. Select a Network Driver.
Select one of the available Network Drivers that are displayed in the
Network Drivers field. Once selected, the Network Driver will assign a
network address to the system.
Notes:
1) The fields that appear beneath the Driver Enabled check box will
change depending on which Network Driver has been selected.
2) When enabling the IPX or TCP/IP Network Driver, the network address
cannot be altered and it will not appear on the screen. No field will
appear beneath the Driver Enabled check box if the IPX or TCP/IP
Network Driver is selected.
3) When enabling the NetBIOS Network Driver, a network address will be
selected and displayed in the Network Address field. To change this
default name, enter any 1–8 character address. However, this address
42
Netfinity

4000R User's Handbook