IBM N6270, Руководство по аппаратуре и обслуживанию

Страница: 38 / 148

Table 12. Filer installation process procedures
Stage Procedure
Is the procedure
required?
Procedure is performed by...
For instructions, see... Filer Gateway
1 Print and complete
a configuration
worksheet for each
system node of
your storage
system to gather
the information
that the software
setup process
requires. Yes Customer Customer The configuration worksheet
is provided in the
Data
ONTAP Software Setup Guide
for your version of Data
ONTAP.
2 Install the system
in a standard IBM
19-inch rack. Yes Customer IBM The Installation and Setup
Instructions for your system
3 Connect the system
to the IP (Internet
Protocol) network. Yes Customer Customer “Connecting your system to
an IP network” on page 13,
or the
Installation and Setup
Instructions that came with
your system
Filer: Connect the
storage system to
storage expansion
units.
Yes Customer n/a “Connecting a filer to storage
expansion units” on page 15,
or the
Installation and Setup
Instructions that came with
your system
4 Gateway: Connect
the system to the
back-end storage.
Yes n/a Customer Refer to the documentation
for your external storage for
additional information.
5 Connect the system
to a power source. Yes Customer Customer “Connecting your system to
a power source” on page 13,
or the
Installation and Setup
Instructions that came with
your system
6 Configure the
system. Yes Customer Customer The Data ONTAP Software
Setup Guide for your version
of Data ONTAP, or the
Installation and Setup
Instructions
that came with
your system
7 Connect the system
to a third-party
device. No Customer Customer “Connecting your system to
storage” on page 15
12
IBM System Storage: N6200 Series Hardware and Service Guide