IBM System Storage N3700 A20 Setup
17
2. After completing the initial setup procedure, we log on to the appliance:
login: root
password: <password_you_selected_during_setup>
3. Now we can start with disk management. First, we check the disk ownership.
Each cluster node must have one or two disks (SES disks). Verify the disk
information:
storage show disk or sysconfig -r
4. Then, we assign the disks to the N3700 controllers Node A and Node B. Make
sure you have your completed disk ownership worksheet.
disk assign 0b.NN
5. After assigning the disks to the nodes, verify that all disks are assigned to the
correct node with the
sysconfig -r
command (Figure 15).
Figure 15 Command line output: sysconfig -r