8
IBM System Storage N3700 A20 Setup
3. Set the 1Gb/2Gb switch to the 1Gb position (Figure 6).
Figure 6 Setting the 1Gb/2Gb switch
4. Connect the Ethernet cable to the (green) Ethernet port in the middle of the
controller module’s Node A. Repeat this for Node B. See Figure 7 on page 9.
5. Connect the console cables (DB9-RJ45 converter) to the console port
(purple) from Node B and Node A on the back of the appliance (Figure 7 on
page 9). If you are attaching a third-party device, such as a tape backup or a
fibre channel switch, leave the fibre channel ports (orange ports)
un-terminated. Refer to “Connecting to third-party devices” in IBM System
Storage N series N3700 Hardware and Service Guide, GA32-0515, for
details.
1Gb/2Gb Switch