IBM MTM 2145-12F, Руководство по установке оборудования

Страница: 25 / 214

To reduce the possibility of electrostatic discharge, observe the following
precautions:
v
Limit your movement. Movement can cause static electricity to build up around
you.
v Handle the device carefully, holding it by its edges or frame.
v Do not touch solder joints, pins, or exposed printed circuitry.
v Do not leave the device where others can handle and possibly damage the
device.
v While the device is still in its antistatic bag, touch it to an unpainted metal part
of the system unit for at least two seconds. (This action removes static electricity
from the package and from your body.)
v Remove the device from its package and install it directly into your SAN
Volume Controller, without putting it down. If it is necessary to put the device
down, place it onto its static-protective bag. (If your device is an adapter, place it
component-side up.) Do not place the device onto the cover of the SAN Volume
Controller or onto a metal table.
v Take additional care when you handle devices during cold weather. Indoor
humidity tends to decrease in cold weather, causing an increase in static
electricity.
Environmental notices
The IBM Systems Environmental Notices contains all of the required environmental
notices for IBM Systems products in English and other languages.
The IBM Systems Environmental Notices (http://ibm.co/1fBgWFI) includes
statements on limitations, product information, product recycling and disposal,
battery information, flat panel display, refrigeration and water-cooling systems,
external power supplies, and safety data sheets.
Safety and environmental notices
xxv