IBM J11M, Быстрый старт

Страница: 9 / 30

■
The rack rails must be spaced widely enough to accommodate the router chassis's
external dimensions: 27.75 in. (70.49 cm) high, 23.0 in. (58.42 cm) deep, and
17.37 in. (44.11 cm) wide. The outer edges of the mounting brackets extend the
width to 19 in. (48.3 cm).
■
The rack must be strong enough to support the weight of the fully configured
router, up to 350 lb (158.76 kg). If you stack three fully configured routers in
one rack, it must be capable of supporting about 1,050 lb (476.3 kg).
■
For service personnel to service the machine, there must be adequate space at
the front and back of the router. Allow at least 30 in. (76.2 cm) in front of the
router and 24 in. (61 cm) behind the router.
■
The rack or cabinet must have an adequate supply of cooling air.
■
The router must be installed into a rack that is secured to the building structure.
■
The router should be mounted at the bottom of the rack if it is the only unit in
the rack.
■
When mounting the router in a partially filled rack, load the rack from the bottom
to the top with the heaviest component at the bottom of the rack.
Tools Required
To unpack the router and prepare for installation, you need the following tools:
■
Mechanical lift
■
Phillips (+) screwdrivers, numbers 1 and 2
■
2.5 mm flat-blade (–) screwdriver
■
7/16-in. (11 mm) torque-controlled driver or socket wrench
■
1/2-in. or 13-mm open-end or socket wrench to remove bracket bolts from the
shipping pallet
■
Electrostatic discharge wrist strap (recommended)
■
Antistatic mat
Step 1: Prepare the Site
■ 7
Step 1: Prepare the Site