IBM J11M, Быстрый старт

Страница: 10 / 30

Step 2: Install the Mounting Hardware
To install the mounting hardware in a four-post open rack or open cabinet or an
open-frame rack, perform one of the following procedures:
■
Install the Mounting Hardware in a Four-Post Open Rack or Open
Cabinet on page 8
■
Install the Mounting Hardware in an Open-Frame Rack on page 9
Install the Mounting Hardware in a Four-Post Open Rack or Open Cabinet
To install the mounting shelf:
1.
On the front rack rails, install cage nuts in the holes specified in the IBM Ethernet
Router J11M Hardware Guide for the large shelf and the spacer bars.
2.
On the front of each front rack rail, partially insert a mounting screw into the
hole containing the lowest cage nut.
3.
Install the large shelf on the front rack rails. Rest the bottom slot of each ear on
a mounting screw.
4.
Partially insert a mounting screw into the top hole in each ear of the large shelf.
5.
Tighten all the screws completely.
6.
On the rear rack rails, install cage nuts in the holes specified in the IBM Ethernet
Router J11M Hardware Guide for the small shelf.
7.
On the back of each rear rack rail, partially insert a mounting screw into the hole
containing the lowest cage nut.
8.
Install the small shelf on the back rack rails. Rest the bottom slot of each ear on
a mounting screw. The small shelf installs on the back of the rear rails, extending
toward the center of the rack. The bottom of the small shelf should align with
the bottom of the large shelf.
9.
Partially insert screws into the open holes in the ears of the small shelf.
10.
Tighten all the screws completely.
8 ■
Step 2: Install the Mounting Hardware
IBM Ethernet Router J11M Quick Start