IBM iSeries 5075, Настройка

Страница: 27 / 49

Chapter 5. Verifying Your New Configuration
Verify your new configuration by performing the following:
__ 1. On an AS/400 command line, type:
STRSST
. Press the Enter key.
__ 2. When the System Service Tools menu appears, select the Start a service tool
option.
Press the Enter key.
__ 3.
When the Start a Service Tool menu appears, select the Hardware service
manager option.
Press the Enter key.
__ 4.
When the Hardware Service Manager menu appears, select the Packaging
hardware resources (system, frames, cards...) option.
Press the Enter key.
Your new Expansion Unit appears on the list. Record the Frame ID and
Resource name here:___________, ___________. If your expansion unit does
not appear, you need to verify your installation by performing these steps:
__ a. Make sure that you powered on your 5075.
__ b. Make sure that you installed the cables correctly. Refer to “Chapter 2.
Installing your 5075 directly to your system unit” on page 7 or
“Chapter 3. Connecting your 5075 to another expansion unit” on
page 9.
__ 5.
You need to update vital product data (VPD) for your new 5075:
__ a. Press F3 to return to the Hardware Service Manager display.
__ b. At the Hardware Service Manager display, select the System power
control network (SPCN) .
__ c. Press the Enter key twice.
__ d. Locate your expansion unit on the System Power Control Network
display by Frame ID.
__ e. Enter a
3
( Write VPD ) for the Frame ID with a 0 in the
Unit
field as is
shown in the example below. Press Enter.
Example:
If the Frame ID for your expansion unit is 2, put the cursor in
front of the 02. Then enter a
3
( Write VPD ), as is shown in the
example below. Use the Frame ID with a 0 in the Unit field.
© Copyright IBM Corp. 2000
17