manualshive.com logo in svg

IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard..., Технические характеристики, Страница: 72 / 249

Поделиться
Скачать
IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard... Скачать руководство пользователя страница 72

The drive returns CHECK CONDITION status with the
sense key of ILLEGAL REQUEST and the additional sense
code of INVALID FIELD IN CDB.

Any values

1

1

The drive returns 2 bytes data ( 0001h as unsupported).

Unsupported

0

1

The drive returns command support data of page code
requested.

Supported

0

1

The drive returns CHECK CONDITION status with the
sense key of ILLEGAL REQUEST and the additional sense
code of INVALID FIELD IN CDB

Unsupported

1

0

The drive returns the vital product data of page code
requested.

Supported

1

0

The drive returns CHECK CONDITION status with the
sense key of ILLEGAL REQUEST and the additional sense
code of INVALID FIELD IN CDB.

Non Zero

0

0

The drive returns the standard INQUIRY data.

0

0

0

Description

PAGE CODE

EVPD

CmdDt

Figure 56. Page code descriptions

!

Allocation Length specifies the number of bytes that the initiator has allocated for INQUIRY data to
be returned. An allocation length of zero implies that no data returned. The drive will terminate the
DATA IN phase when all available INQUIRY data has been transferred or when allocation length
bytes have been transferred, whichever is less.  

If an INQUIRY command is received from an initiator with a pending unit attention condition (before the
drive reports CHECK CONDITION status), the drive processes the INQUIRY command. The unit attention
condition is not cleared by this action.

 

Ultrastar 146Z10 hard disk drive specifications

56

Содержание IC35L036UWDY10 - Ultrastar 36.7 GB Hard...


























































































































































































































































Отзывы:

Нет отзывов