manualshive.com logo in svg

IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard..., Технические характеристики, Страница: 139 / 249

Поделиться
Скачать
IBM IC35L036UWDY10 - Ultrastar 36.7 GB Hard... Скачать руководство пользователя страница 139

RD

READ (6) command and READ (10) command

WR

WRITE (6) command and WRITE (10) command

NWR

Commands except the following:

!

READ (6) command and READ (10) command

!

WRITE (6) command and WRITE (10) command

!

RESERVE and RELEASE command

If any key is registered, the drive returns a RESERVATION CONFLICT status.

!

PERSISTENT RESERVE IN command and PERSISTENT RESERVE OUT command

SH

SHared: The

 

drive executes the command from all initiators.

EX

EXclusive: The

 

drive executes the command from initiator which holds the persistent

reservation and rejects the command from the other initiators with RESERVATION
CONFLICT status.

PH

ProHibited: The

 

drive rejects the command from all initiators.

EO

Exclusive registrant Only: The

 

drive executes the command from initiator which has

registered a key and rejects the command from the other initiators with RESERVATION
CONFLICT status.

A1

The

 

drive rejects new PERSISTENT RESERVATION on any types and returns

RESERVATION CONFLICT status.

A2

The

 

drive accepts new PERSISTENT RESERVATION with Write Exclusive Registrants

Only type and Exclusive Access Registrants Only type.  The drive rejects new
PERSISTENT RESERVATION with Write Exclusive type and Exclusive Access type and
returns RESERVATION CONFLICT status.

No

No

Yes

Yes

Exclusive Access Registrants
Only (6)

No

No

Yes

Yes

Write Exclusive Registrants
Only (5)

Yes

Yes

Yes

Yes

Exclusive Access (3)

Yes

Yes

Yes

Yes

Write Exclusive (1)

6

5

3

1

New Type

Figure 116. Conflict between new and existing PERSISTENT RESERVATION

Ultrastar 146Z10 hard disk drive specifications

123

Содержание IC35L036UWDY10 - Ultrastar 36.7 GB Hard...


























































































































































































































































Отзывы:

Нет отзывов