IBM FlashSystem 840, Руководство по установке

Страница: 59 / 78

1
,
2
USB ports
1
Canister status LED
2
Canister identify LED
12. When initialization completes, the identify LED, which is blue, will go off, and
the canister status LED will come on solid, indicating that the canisters have
clustered. The process can take up to 3 minutes. Figure 20 shows the locations
of the status and identify LEDs on the rear panel.
13. If the system initialization finished successfully, click Finish . The system
management GUI is displayed.
14. Log in with user name superuser and password passw0rd.
Note:
The 0 character in the password is a zero, not the letter O.
15. Follow the on-screen instructions to begin setting up your system.
Initializing the system with an Apple Macintosh computer
To initialize a new system with an Apple Macintosh computer, use the USB flash
drive initialization tool that was included with your order.
Before you begin
v
Begin this procedure after the physical installation of the enclosure is finished.
v You need a computer to complete the initialization procedure. The computer
must have a USB port.
v
If your computer does not have a network connection to the system, go to the
computer you use to manage the system. Start a supported browser and direct
the browser to the management address you specified for the system.
About this task
This procedure is valid for Apple MacOS X 10.7. Use this procedure only when
you initialize a new control enclosure.
2 1
tms00033
Figure 19. USB ports
Figure 20. Status and identify LEDs
Chapter 3. Initializing the storage enclosure
37